LK-AG 100
Silicone Super Spreader
Introduction:
LK-AG 100 Silicone Super Spreader is an advanced trisiloxane ethoxylate-based adjuvant formulated to drastically lower the surface tension of spray solutions. It outperforms traditional nonionic surfactants by delivering enhanced spray coverage, faster absorption, and improved application efficiency.
Key Features:
- Ultra-Low Surface Tension: Enables superior spreading in soluble liquid (SL) and emulsifiable concentrate (EC) formulations along with water.
- Spray Volume Reduction: Helps reduce the amount of spray solution needed without compromising effectiveness.
- Rapid Uptake and Rainfastness: Promotes faster absorption of agrochemicals, improving resistance to wash-off from rain.
- Enhanced Spray Coverage: Significantly improves uniform coverage on target surfaces, enhancing the performance of agrochemicals.
- Nonionic Nature: Compatible with a wide range of agrochemical formulations without interfering with active ingredients.
Physical properties:
| Property | Value |
|---|---|
| Type | Non-ionic silicone surfactant |
| Appearance | Clear/slight hazy amber liquid |
| Viscosity | ~45 cps |
| Density | ~1.01 g/ml |
| Refractive Index | ~1.445 |
Application:
LK-AG 100 is a premium superwetting and spreading agent designed to enhance the performance of agricultural sprays. It can be used in: Pesticides, fungicide, herbicides, foliar fertilizers, plat growth regulators and other formulations to improve –
- Spreading and Wetting : Better pick-up of fertilizer and PGRs.
- Dosage : Reduced spray run-off and wastage.
- Efficiency : Lower spray volume and better coverage.
- Yield : More effective use of pesticides/fungicides, reduces man power, wastage and energy.
Usage Guidelines:
1. In Formulations:
- Stable in neutral aqueous systems (pH ~7)
- Not recommended for acidic or alkaline formulations
- Test thoroughly for shelf-life and compatibility
2. As a Tank-Mix Adjuvant: Add directly to the spray tank for better coverage and performance.
Recommended Dosages:
- Plant growth regulators (0.05-0.25%)
- Herbicides (0.05-0.1%)
- Insecticides (0.05-0.1%)
- Fungicides (0.05-0.1%)
- Fertilizers (0.05-0.1%)
Case Studies of LK-AG 100 Silicone Super Spreader
FAQs:
What is the product LK-AG 100 Silicone Super Spreader?
LK-AG 100 is a silicone-based surfactant compound used as a non-ionic spray adjuvant for foliar spray and tank mix applications. It is designed to enhance the performance of nutrients, pesticides, herbicides, and other agrochemicals by significantly reducing the surface tension of water. This results in superior spreading and coverage on plant leaf surfaces, making it highly effective as a super spreader in agricultural spray applications.
What is the ideal dosage used for foliar spray application?
The typical usage level of LK-AG 100 ranges from 0.01% to 0.5%, depending on the formulation requirements and the type of agrochemical application. Lower concentrations (e.g., 0.01%) are generally sufficient for foliar sprays, while higher levels may be used for more demanding formulations or specific crop needs.
Is LK-AG 100 suitable for all types of agrochemicals?
Yes, LK-AG 100 is compatible with all major types of agrochemicals, including nutrients, pesticides, and herbicides.
What is the solid content of this product?
LK-AG 100 is a silicone-based super spreader compound with a high active content, typically in the range of 95–99% solids when measured at 110°C for 1 hour. This high solid content ensures excellent efficacy even at low dosage levels.
Is this product water-miscible, and can it form a stable formulation once diluted with water?
The silicone super spreader LK-AG 100 is water-miscible and can be used as a tank mix additive. When using it, ensure the solution pH is between 5 and 7, and apply it within 24 hours.
However, the diluted solution is not stable over an extended period and should be used shortly after preparation to ensure optimal performance. It is recommended to prepare a fresh dilution before each application.
What is the surface tension of this product?
When diluted at a concentration of 0.01%, LK-AG 100 can reduce the surface tension of water to approximately 22 dynes/cm². This significant reduction enhances spreading and wetting properties, making it highly effective as a spray adjuvant in agricultural applications.
Do you have a toxicological certificate for this grade?
Yes, the silicone super spreader LK-AG 100 has undergone toxicological testing and is considered safe for use in agricultural applications.
On which crops has LK-AG 100 been studied, and what were the results?
We have conducted field studies using LK-AG 100 on the following crops:
Floriculture (Gerbera and Marigold): Enhanced spreading and improved nutrient uptake were observed, resulting in better flower quality and yield.
Horticulture (Banana, Brinjal [Eggplant], and Chili): Increased crop yield and improved plant vigor were noted due to better spray coverage and absorption.
These trials demonstrated that LK-AG 100 enhances the efficiency of agrochemical sprays, contributing to higher productivity and improved crop quality.
Is LK-AG 100 manufactured in China?
No, LK-AG 100 is not manufactured in China. It is produced by Elkay Chemicals in India, adhering to high-quality manufacturing standards and strict regulatory compliance. We ensure consistent product quality and reliable supply from our state-of-the-art facility in India.
Can this product be shipped to international destinations?
Yes, LK-AG 100 Silicone super spreader manufactured by Elkay Chemicals in India is available for international shipping. We supply to customers across various global regions, including North America, South America, Europe, Asia, the Middle East, Africa, and Australia.
Our logistics and export team ensures smooth and compliant delivery to all major international markets. For detailed shipping information and support, please contact our sales team.